The glaze cabinet is used for the glaze of the sanitary ceramic industry. The overall structure is made of stainless steel or plastic plate, the glaze slurry can be fully recycled, according to the customer's needs or on-site configuration to make a centralized dust removal type or separate water bath dust removal type glaze cabinet. Technical parameters (1) Workbench rotary diameter: 1200-1500mm (2) number of glazed curtain layer: 3 layers (3) dust removal form: centralized dust removal or water bath dust removal (4) fan power: 3kW 2900rpm. At present, the toilet and toilet billet body produced by sanitary ceramic production enterprises at domestic and foreign countries should be equipped with cabinet body for dust removal to achieve the purpose of environmental protection, and the glaze can be recycled. A very common glaze kitchen for water bath dust removal type glaze closet. The water bath dust removal type glaze cabinet, when used, to be carried out under the water bath, the glaze process is not attached to the blank body of the fine glaze dust settlement down, centralized recovery. However, the demand for water in water bath and dust removal type glaze cabinet is large, resulting in a large waste of water resources, and the glaze is diluted by water, resulting in a low recycling utilization rate of glaze. And in raw material resources shortage today, raw material savings means that cost saving, product competition, revenue increase, so in the effective complete product glaze operation and does not affect workers health at the same time, how can not attached to the product of the glaze maximum recycling and utilization has always been the goal of ceramic enterprises.
In view of the above problems, the utility model hopes to provide a new type of dust removal and application glaze cabinet suitable for the recycling of glaze materials.
The utility model is equipped with an air shield on the path connecting the air hood and the cabinet, and the air flow carries the small glaze particles not attached to the ceramic blank when applying the glaze. In this process, the airflow and the glaze particles are blocked by the air hood in front of the cabinet, and most of the glaze particles sucked out by the air hood are trapped to the air hood. With the continuous enrichment of glaze on the plate plate, part of the water-containing glaze (glaze slurry) down the plate, collected in the glaze groove, by the glaze groove will collect the glaze transport car to the glaze car or glaze storage tank.